Wiring Connection - Kenwood KDC-X598 Instruction Manual

Wiring connection

Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
EN_KDC_X598_KWK0_f.indd 23
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 10)
White
White/Black
Light blue/yellow
Gray
(Steering remote
Gray/Black control wire)
Green
Green/Black
Blue/White
(Power control wire)
Purple
Purple/Black
Brown
(Mute control wire)
Red
(Ignition wire)
Yellow
Blue
(Battery wire)
(Antenna control
wire)
MIC (Microphone input terminal) ( 12)
If no connections are made, do not let the wire
come out from the tab.
To the steering wheel remote control
adapter
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
To connect the Kenwood navigation system,
refer your navigations manual.
(Not used)
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH | 23
8/11/2013 5:11:42 PM