Kenwood KDC-X598 Instruction Manual page 13

Bluetooth mobile phone
To Do this
Receive a call
Press
number buttons (1 to 6) (or press
RC-406).
• All the buttons and display flash when there
• When [AUTO ANSWER] is set to the selected
Press B SRC (or press
Reject an incoming
call
End a call
Press
Switch between Press 6 IW during a call.
hands-free and
• Operations may vary according to the
private talk modes
Adjust the phone Turn the volume knob during a call.
volume
Phone volume: [00] to [35] (Default: [15])
• This adjustment will not affect the volume of
Switch between two
Press
connected phones
• Not applicable during a call.
EN_KDC_X598_KWK0_f.indd 13
or the volume knob or one of the
is an incoming call.
During a call, the buttons and display
illuminate according to the settings made for
[DISPLAY]. ( 18)
time, the unit answers incoming call
automatically. ( 14)
on RC-406).
or B SRC (or press
on RC-406).
connected Bluetooth device.
the other sources.
repeatedly.
Improve the sound quality during a call
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table),
on
then press the knob.
3
Press and hold
To return to the previous setting item or hierarchy, press
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases as the
number increased.
NR LEVEL –5 — –20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo
is being heard during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and "SMS
RECEIVED" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1 Press and hold
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding activate the priority device. ( 15, DVC PRIORITY)
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
to exit.
to activate Voice Recognition.
BLUETOOTH®
.
Default: XX
ENGLISH | 13
11/11/2013 12:24:51 PM