Taking Photos; To Capture A Still Image - Polaroid XS100i User Manual

PO LAROID XS100i
USER GUIDE
To stop recording, move the Recording Slide Switch from REC to STOP The camera will vibrate and the LED Indicator
will illuminate GREEN to indicate the recording has stopped. The camera will then enter the Standby mode. An additional
option is to hold the Power Button to stop the recording and turn the camera off. The camera will vibrate two seconds,
and the Red LED light will turn off.
*A smaller video file of 432x240 (w/1080p/720p) or 320x240 (w/960p) will be created simultaneously when recording
an HD/FHD video file. The smaller video file size allows for more efficient uploading of content to social media sites and
email.
*Changing video resolution is disabled during video recording.
*Check that the MicroSD card has sufficient space to capture your video. The card is full when the camera vibrates for
5-seconds, and the Green LED
flashes continuously.
Taking Photos
The XS100i camera allows you to take 16MP, 5MP, 3MP, VGA high-quality still images .
To capture a still image
1. Turn on the camera by pressing the Power Button .
2. If the camera is in the video recording mode, move the Recording Slide Switch to STOP
3. After the camera power has been turned on, press the Power Button to take a photo. A short vibration and a flash
of the Green LED indicate a still photo has been recorded.
*The still photo function is disabled during video recording.
*The default photo mode is "single photo." Burst mode gives you a series of 10 photo shots per second to capture that
"can't miss" moment. Time Lapse mode can be utilized to take a series of photos at 5, 10, 30 or 60-second intervals. To
change the mode, please refer to the section "Changing the camera settings"
*When the memory card becomes full, the camera will vibrate for five seconds and the Green LED will flash
continuously.
7