Height Adjustment And Ability To Turn - Fujitsu Siemens Computers 3815 FA Operating Manual

If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Pull the display of the monitor up and turn the display by 90° into the vertical position (portrait
mode).
Ê
Connect the power adapter cable of the power adapter firmly to the power connector of the
monitor (2) and check whether the socket is securely seated.
Ê
Connect the power cable to the power adapter (3).
Ê
Connect the plug on the power cable supplied to the monitor socket of the computer (4).
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Anti-theft protection
A lock (Kensington Lock) can be mounted in the security slots to protect the monitor from theft. A
Kensington Lock is not included in the consignment of the monitor.

Height adjustment and ability to turn

2
1
You can conveniently adjust the height of your monitor by slightly lifting the display. In addition, you
can also turn the display by 90° into the vertical position (portrait mode). To do this you must slightly
lift the display and turn it clockwise.
You must use corresponding software (pivot software) so that the screen display is also
i
shown in the portrait mode. This software is available from specialised dealers.
A26361-K833-Z100-1-5E19
Colour monitor 3815 FA
English - 9