Table of Contents
Advertisement
Colour monitor 3815 FA
Connecting the monitor
Information on the computer connections and interfaces is contained in the operating manual for
your computer.
Please note the information provided in the "Safety" section in the chapter "Important
!
notes" at the beginning of this manual.
Do not cover the ventilation openings of the monitor.
1
a = Security slots for "Kensington Lock"
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled!
The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the
computer.
Ê
First insert the plug of the data cable through the hole in the monitor base and then connect it
to the active monitor connection of the computer and lock the connector by tightening the
locking screws (1).
8 - English
a
2
3
4
A26361-K833-Z100-1-5E19
Advertisement
Table of Contents
