Removing The Unit - Kenwood DNX7210BT Quick Start Manual

Removing the unit

1) Remove the hard rubber frame by
referring to step 1 in "Removing
the hard rubber frame".
2) Insert the two removal tools
(accessory3) deeply into the slots
on each side, as shown.
3) Lower the removal tool toward
the bottom, and pull out the unit
halfway while pressing towards
the inside.
NOTE
• Be careful to avoid injury from the catch
pins on the removal tool.
4) Pull the unit all the way out with
your hands, being careful not to
drop it.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT
Connector Function Guide
Pin Numbers
for ISO
Connectors
External Power
Connector
A-4
A-5
A-6
A-7
3
A-8
Speaker
Connector
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
*Speaker Impedance: 4-8 Ω
27
Cable Color Functions
Yellow Battery
Blue/White Power Control
Orange/White Dimmer
Red Ignition (ACC)
Black Earth (Ground)
Connection
Purple Rear Right (+)
Purple/Black Rear Right (–)
Gray Front Right (+)
Gray/Black Front Right (–)
White Front Left (+)
White/Black Front Left (–)
Green Rear Left (+)
Green/Black Rear Left (–)