2-Step Throttle Speed; 3-Programmed Abs - Proton 2 Channel FM Radio Control System User Manual

2-Step Throttle Speed (Servo Speed)
This feature becomes available under the heading of Servo Speed when the
programming level in the Pit Mode is set to Advanced. 2-Step Throttle Speed is
similar to the Throttle Speed found under the Intermediate Level, but it has speed
change points. You can adjust the throttle servo's speed moving away from the
neutral (acceleration) and back to the neutral (deceleration) independently, but you
can also set speed change points in both directions independently. You can then
assign individual throttle speed values for each segment as illustrated in the graph
below. To program;
1. In the Servo speed screen, press
acceleration Low-side.
2. Press / button until the desired value appears on Throttle acceleration Low.
3. Press to confirm the new value or
4. Press to move down the list and repeat steps 2 & 3 to program the rest of the
parameters as listed in the example below.
5. Press to return to the Circuit mode menu.
[ Servo speed ]
Th acc L
C.P
Th acc H
Th dec L
C.P
Th dec H

3-Programmed ABS

This 3-Programmed ABS function is only available when the programming level is
set at Intermediate Level from the Pit Mode. This simplified ABS function allows you
to select on of the three pre-programmed ABS setting; Slow, Medium and Fast.
We recommend you to try out all three levels and see how they work for your
surface model under different circuit and race conditions. To select;
1. Press button until the cursor is at ABS.
2. Press button to display the ABS screen as shown below.
3. Press / button until the cursor is at your desired level.
4. Press button to set.
5. Press button returns to the Circuit menu.
Circuit mode
EPA
Response
Start / Idle up
DBA
NOTE is displayed on the LCD when ABS is activated.
ABS
90%
50
87%
75%
60
65%
[Intermediate Level]
Servo speed
ABS
Data Setting & Programming
[Advanced Level]
button until the cursor is at Throttle
to cancel and retain previous value.
Trigger
Speed
100%
acceleration speed
90%
87%
deceleration speed
75%
65%
0
Neutral
50
change point
[ ABS ]
OFF
SLOW
MEDIUM
FAST
28
Max
60