Honda EG1400X Owner's Manual page 16

AC applications
1. Start the engine and plug in the appliance; always use three-pronged plugs.
2. Switch on the AC Circuit Breaker.
CAUTION: Substantial overloading will switch off the circuit breaker. Mar-
ginal overloading may not switch off the circuit breaker, but it will shorten
the service life of the generator.
Be sure that all appliances are in good working order before connecting them
to the generator. If an appliance begins to operate abnormally, becomes
sluggish, or stops suddenly, turn off the circuit breaker and the generator
engine switch immediately. Then disconnect the appliance and examine it for
signs of malfunction.
NOTE: If an overloaded circuit causes the AC circuit breaker to switch off,
reduce the electrical load on the circuit and wait a few minutes before reset-
ting the circuit breaker.
14