Http - Liebert OpenComms Installation & User Manual

The MIBs for the OpenComms Network Interface Card are
available for
www.liebert.com. Navigate through Products, then Site
Monitoring & Software and proceed to the OpenComms support
information area. The RCF 1628 MIB can be downloaded at
www.ietf.org (the Internet Engineering Task
Force).
Physical media containing MIB files do not ship with the
hardware.

HTTP

Status and alarm information can be queried by web browsers
via HTTP v1.1 (Hyper Text Transfer Protocol). The data is
shown in an intuitive graphical format, akin to the unit's front
bezel controls. Currently, the following browsers have been
tested and are supported:
Microsoft Internet Explorer, versions 5.x and later
Limited Support for: Netscape 6.0 & Opera 5
Font sizing may need to be adjusted on your browser for optimal
viewing.
With appropriate NMS software and configuration, the user on
reception of SNMP traps may view HTTP pages in order to view
the overall operating status of the unit – or HTTP may be used
on its own to monitor "on-demand" the unit operation. HTTP
pages will automatically refresh (reload) every 20 seconds and is
adjustable through the service terminal program.
NIC Setup and Testing
download on the Liebert Web site,
25