Turning On/Off - Klipsch Image One Bluetooth Owner's Manual

PAIRING
Before using the headset for the first time it must be paired with a Blue-
tooth device (mobile phone, etc.).
1. ensure the headset is off.
2. Hold the Power/Pairing button for 5 seconds. The headset will turn on
B B B B B
3. Turn on Bluetooth on the device and set it to search for Bluetooth
devices.
4. select "Klipsch BT ImageOne" from the device list.
5. If prompted to enter a passcode enter 0000.
Once a device has been paired the headset will remember it. when the
headset is turned on it will automatically scan for remembered devices,
beginning with the most recently paired. up to 8 devices are memorized.

TuRNING ON/Off

then the status indicator will rapidly flash
Hold 3 seconds
status Indicator
On B B B B B
OFF
R R R R R
R B R B