Model 866 - Omega 865 User Manual

3.2.2 Model 866 (See Figure 3-2)
1. Turn power on. Turning power on also selects the 150°C measurement range.
2. Insert appropriate temperature probe into the input jack.
3. Touch the probe tip to the material to be measured and read the display in
degrees Celsius.
An open sensor is indicated by a reading on the display of
greater than -100.0°. Overrange is indicated by blanking of
the three least-significant digits. Low battery (10% life remain-
ing) is indicated by LO BAT on the display.
Figure 3-1 Model 865 Control Layout
NOTE
3