Advertisement
241 mm
(9-1/2)
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
1073mm
(42-1/4)
537mm
(21-1/8)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
VALVES
95mm
(3-3/4)
102mm
305mm
(4)
(12)
51mm
(2)
540mm
(21-1/4 )
489mm
(19-1/4)
SAFE-T-HEATER
1-1/2 N.P.T.M.
REMOVABLE
THREADS
BLANK
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2903 WHIRLPOOL
INSTALLED SIZE
60 x 42-1/4 x 21-1/4 In.(1524 x 1073 x 540mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS
SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING
AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
OPTIONAL TILING BEAD KIT AVAILABLE.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF (152mm) 6 ABOVE ROUGH FLOOR.
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified.
IMPORTANT:
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
1524mm
(60)
▲OUTLINE OF
CUTOUT - USE
TEMPLATE
PUMP
(MAY
EXTEND
BEYOND
RIM BY 1-1/2")
PROVIDE ACCESS
TO PUMP FOR
ON/OFF
SERVICING ON ALL
SWITCH
INSTALLATIONS
C/L OF
SHOWER ARM
C/L OF
SPOUT
1651-1981mm
(65-78)
OPTIONAL
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
53 x 32 In. (1346 x 813mm)
15 In. (381mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
27.8
45.4
1.6 HP, 9.7 AMPS, 120V.
© 2005 American Standard Inc.
SAVONA OVAL™ WHIRLPOOL
241 mm
(9-1/2)
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
1073mm
(42-1/4)
537mm
(21-1/8)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
VALVES
95mm
(3-3/4)
102mm
305mm
(4)
(12)
51mm
(2)
540mm
(21-1/4 )
489mm
(19-1/4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2903 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
HIGH GLOSS ACRYLIC
1524mm
(60)
▲OUTLINE OF
CUTOUT - USE
TEMPLATE
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
C/L OF
SHOWER ARM
C/L OF
SPOUT
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
60 x 42-1/4 x 21-1/4 In.
(1524 x 1073 x 540mm)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
45 x 23 In. (1143 x 584mm)
53 x 32 In. (1346 x 813mm)
15 In. (381mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
1651-1981mm
(65-78)
OPTIONAL
27.8
45.4
Advertisement
