American Standard Savona Elite 2901E SERIES Installation Instructions

SAVONA ELITE™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
905mm
(35-5/8)
552mm
1105mm
(21-3/4)
(43-1/2)
305mm
(12) 140mm
(5-1/2)
C/L OF 1-1/2 O.D.
DRAIN OUTLET
RECOMMENDED
FITTING LOCATION
64 X 279mm (2-1/2 X 11)
38mm
(1-1/2)
51mm
(2)
INTEGRAL
FEET
44 mm
(1-3/4)
89 mm
(3-1/2)
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 2901E WHIRLPOOL
INSTALLED SIZE 71-1/4 x 43-1/2 x 22 In.(1810 x 1105 x 559mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752867-100 Rev. D
2901E SERIES
WHIRLPOOL

INSTALLATION INSTRUCTIONS

1810mm
(71-1/4)
IN-LINE HEATER
REMOVABLE
BLANK
C/L
178mm
(7)
ON/OFF
SWITCH
229mm X 305mm
(9 X 12) FLOOR
CUTOUT
PROVIDE ACCESS
TO PUMP FOR SERVICE
ON ALL INSTALLATIONS
C/L OF OVERFLOW
LEVELING STRINGER
89mm
NOT FOR SUPPORT
(3-1/2)
ROUGH
FLOOR
1-1/2 N.P.T.M.
THREADS
152 Lbs. (68 Kg.)
936 Lbs. (421 Kg.)
94 Gal. (356 L)
86 Gal.(326 L)
44 x 28 In. (1118 x 711mm)
67-1/2 x 33 In. (1715 x 838mm)
16-1/4 In. (413mm)
43 Lbs./Sq.Ft. (211 Kgs./Sq.m)
2.1 HP, 14.4 AMPS, 120V.
19mm
(3/4)
TYP.
THANK YOU...
for selecting an American Standard bath. Your new
bath is shipped to you after careful inspection. The
PUMP
OUTLINE OF whirlpool version is completely assembled with pump,
1772mm X
motor, and system piping. All you need to finish the
1067mm
(69-3/4 X 42)
installation are your selected fittings and electrical
CUTOUT
connections for a whirlpool.
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Flex-Jet Pulse Jet Kit*
• Flex-Jet Soft Jet Kit*
• E-Z-Install Heater*
• Tile Bead Kit*
559mm
(22)
List of Required Components (not included):
508mm
(20)
• Drain*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
27.8
• Personal Safety
61.5
Equipment
• Caulking Gun
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
• Drop Cloth
• 20 amp GFI
• Cement, Plaster,
© American Standard Inc. 2003
All product names listed herein are trademarks of
American Standard Inc. unless otherwise noted.
Stringers
Outlet
Grout