American Standard Savona Oval Whirlpool 2903.018W Specifications

SAVONA OVAL™ WHIRLPOOL
❏
2903.018W Whirlpool
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Dual, molded-in arm rests
• 1.5 HP, single speed, self-draining pump/motor
• Factory installed power cord and plug
• Eight multi-directional and flow-adjustable jets
including:
- Two foot jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
❏
2903.018WC StayClean™ Whirlpool
Massage featuring System I
• Same as 2903.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏
2903.002 Bathtub only
Nominal Dimensions: 60 x 42-1/4 x 21-1/4
(1524 x 1073 x 540mm)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Rev. 9/05
SAVONA OVAL™ WHIRLPOOL
To Be Specified - Required:
❏
Color: (specify color)
❏
Bath Faucet (specify finish)
❏
Rotary Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Safe-T-Heater*: 9075.120
❏
Jet Trim Ring Kit: 9860.200-two per kit
(specify finish) for Body Massage Jets only
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
© 2005 American Standard Inc.
HIGH GLOSS ACRYLIC
BV-8