Honda QH5000 Operator's Manual
Honda QH5000 Operator's Manual

Honda QH5000 Operator's Manual

Front quick-hitch kit

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Honda QH5000

  • Page 2: Safety Messages

    The purpose of these messages is to help.prevent property, or the environment. Kit. and operation of the Honda QH5000 Quick-Hitch A parts list and customer service information or to change specifications No part of this publication We have provided important safety messages and tractor.
  • Page 3: Safety Label Location

    SAFETY Read this operators manual carefully, and familiarize yourself fully with its safety recommendations and operating procedures before using the attachment. all times, and insist that those who work with you do likewise. personal injury or equipment damage. SAFE OPERATING RULES To avoid injury, keep bystanders, Stay clear of the front of the hitch and pinch points.
  • Page 4: Installation

    INSTALLATION INSTRUCTIONS 1. HITCH PIVOT INSTALLATION RT5000 and H5013 Tractors: The 16.1 mm diameter hitch pivots provided with the tractor must be replaced with 22.1 mm diameter pivots. Pivot, 22.1 mm (2 required) H/C 3502374; P/N 76323-752-JO0 a. Remove the six 8 x 16 mm flange bolts from lower frame cover B, and remove cover B for access to the hitch pivot rear mounting holes.
  • Page 5 2. Install a 5/s2-inch cotter pin in one end of the pivot rod, and place a 7/8-inCh flat washer on the inner side of the cotter pin. 3. Lift the rear of the Quick-Hitch position between the hitch pivots, and secure the hitch with the pivot rod.
  • Page 6: Replacement Parts

    REPLACEMENT PARTS 1 Pin (l/4” x 1 3/r. 1 Cotter Pin 13/32” ; 3/4”) 1 Attaching Lever 1 Rubber Handle Grip 1 Flat Washer 19/16”) r Cotter Pin (l/8” x 1”) Bolt (3/8” NC x 1 l/2”) Lock (3/8” NC, Nylon) Pivot Rod Flat Washer (11 /16”)
  • Page 7: Customer Service Information

    CUSTOMER SERVICE INFORMATION Honda Power Equipment dealership answer any questions you may have. If you encounter a problem that your dealer does not solve to your satisfaction, please discuss it with the dealership’s General Manager can help. Almost all problems are solved in this way.

Table of Contents