About This Machine And Manual; Features And Nomenclature - Jet J-3130 Operating Instructions And Parts Manual

4.0 About this machine and manual

The JET 5"x8" Band Saw is available as a dry cutting saw or a wet cutting saw. If required, a dry cutting band
saw can be retrofitted with a kit which converts it to use with cutting fluids. The use of an hydraulic feed delivers
consistent, accurate cuts and longer blade life.
This manual is provided by Walter Meier (Manufacturing) Inc. covering the safe operation and maintenance
procedures for a JET Model J-3130 and J-3230 Band Saw. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your
machine has been designed and constructed to provide years of trouble-free operation if used in accordance
with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or Walter Meier. Walter Meier can also
be reached at our web site: www.waltermeier.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!

5.0 Features and Nomenclature

Figure 1: Features and nomenclature
6