Honda HT-R3811 Owner's Manual page 50

n
Replacement
1. Remove the cutter deck (see pages 34 thru. 36).
2. Remove the blade belt (see page 49).
3. Hold the bracket and move the knob to the right so that the tensioner arm
moves in the direction indicated by the arrow.
TENSIONER ARM
BRACKET
.EYS
CAUTION:
l
Wear heavy gloves to protect your hands when replacing the blade belt,
and don't put your hands between the pulleys.
l
Grasp the knob on the tensioner pulley firmly, and return the tensioner arm
slowly; don't let it snap back.
4. Remove the belt guide plate by removing the two 8 mm bolts.
5. Remove the two belt guide bolts and remove the deck belt.
6. The installation sequence is essentially the reverse order of removal.
BELT GUIDE BOLTS 8 mm
Q
Lh
BELT GUIDE PLATE
TENSIONER ARM
DECK BELT