Turning The Monitor On In Set Mode - Accu-Chek Active User Manual

3.2 Basic settings
22
015134 AccuChek Active_Eng.indd 22-23

Turning the monitor on in Set Mode

You use only the M and S buttons on the front of your Accu-Chek
Active to enter the desired settings.
Briefly press the S button (for less than 3 seconds). Accu-Chek
Active is now turned on and in Set Mode.
In the display you see the following:
the current time display format (24h/12h)
flashing: the current time, or 0:00 (a.m.) when you turn on the
monitor for the first time
flashing: the current date, or 0.0 (0-0) when you turn on the
monitor for the first time
23 23
12.08.2004, 14:54:07