Installing the
Step
batteries con't
4
Hold the end of the clear plastic
strip down over the batteries
while sliding the battery cover
back in place.
5
Wait 5 seconds, then press the
button to turn the meter on.
The temperature symbol will
appear when the batteries are
first inserted. This is normal and
will disappear after 30 seconds. If
symbol remains after 30 seconds,
call Accu-Chek
at 1-800-858-8072.
14
Action
SM
Customer Care
Turning the Beeper On or Off
Turning the beeper on or off does not
Introduction
affect the test results.
The Accu-Chek
set to beep when:
• A test strip is inserted
• Blood or control solution is
applied to the test strip
• A result is displayed
• An error occurs while testing
• Buttons are pushed
• Batteries are installed
15
®
Advantage
®
Meter is