Dimplex EUH-B Quick Manual page 3

c. Fan only Switch - An optional "Fan only" switch kit (Catalogue EUAF2) is available for fi eld installation
in the unit. The fan switch is mounted in the space provided adjacent to the built-in thermostat located at
the front of the unit. Field connections are made at the control terminal block in accordance with the unit
wiring diagram.
6. START-UP:
a. Before the unit is energized, the discharge louvers should be be adjusted for desired air defl ection.
Louvers may be adjusted for either horizontal or vertical air defl ection by rotating the louvre frame.
(See fi gure 3)
b. Check to see that all controls and optional accessories are operating properly.
7.MAINTENENCE:
a. Under normal conditions, the heater should be cleaned once a year. DISCONNECT ALL POWER before
cleaning or servicing the heater.
b.All motors are lubricated for extended life operation, and will not have to be oiled.
FIGURE 3