Plena DVD Player-Tuner | Installation and User Instructions | Equipment
1 Make sure the power switch (1) on the front of the
Plena DVD Player-Tuner is set to off - not pushed in
(see figure 3.2).
Potential equipment damage. Before
connecting the mains lead, always check the
voltage selector on the rear panel of the Plena
2 Make sure the voltage selector (115V/ 230V) is
correctly set for the country's main voltage (see
3 Make sure the mains lead is connected to the Plena
DVD Player-Tuner and the power supply
(see figure 3.5).
Bosch Security Systems | 2008-09 | 9922 141 50772 en
en | 16