HTC Gene Service Manual page 33

I. If current consumption test PASS when UUT in Flight and Sleep mode, it means that the
M/B works normal.
II.
If current consumption test FAIL when UUT in Flight or Sleep mode, it means that the M/B
works abnormal, please replace M/B and re-test again.
HTC confidential
© 2004, HTC CORPORATION. ALL RIGHTS RESERVED.
6.Turn on power supply ( 4V) and current
meter ( 2A)
Set the unit to :
* Flight mode
* Turn off Bluetooth
7. Measure flight mode current
Choice
Setting/System/Backlight/Brightness
Adjust brightness level to power save.
Current value must under
over, it means M/B failed, please
replace M/B for repair.
8. Switch OFF the unit.
Unit is turn off and no display.
9. Measure power off current
Check current value on the current
meter,
Current value must under
over, it means M/B failed, please
replace M/B for repair.
Conclusion
TOTAL 53
78mA,
4.5 mA,
CONT.ON. 34 PAGE NO. 33
if
if