Console Pcb - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove the Console PCB
Special Service Tools: NONE
CAUTION! BEFORE REPLACING
CIRCUIT BOARD(S), GROUND
YOURSELF TO EARTH GROUND
USING AN ANTI-STATIC GROUND
STRAP.
1. Remove the battery cover and battery.
2. Remove the four screws under the
console, securing the console to the
console support.
3. Lift the console up just enough to
disconnect the main cable.
4. Remove eight screws from the back of
the console and split the halves.
5. Remove the screws securing the PCB to
the front half of the console, and remove
the PCB.
6. Discard the PCB, and install new PCB in
the console in the reverse order.
7. Reconnect console and secure onto the
console support with the mounting screws.

Console PCB

Console
Cover (Front)
Battery Cover
36
Console
Cover (Back)
Screws(8)