Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove the Resistor Assembly
Special Service Tools: NONE
CAUTION! BEFORE REPLACING
CIRCUIT BOARD(S), GROUND
YOURSELF TO EARTH GROUND
USING AN ANTI-STATIC GROUND
STRAP.
1. Remove the side shrouds. Refer to, How
To... in this section.
2. Remove two cable mounting screws and
nuts securing the cable to the terminals.
3. Remove mounting screws securing the
resistor to the frame, and then lift out the
resistor assembly.
4. Install new resistor in reverse order.
34
Mounting
Screws
Resistor
Assembly
Cable
Mounting
Screws