Honda HA4118H38A Owner's Manual page 97

TROUBLESHOOTING
Poor cut quality
Possible cause Correction
Check throttle Blades spinning too Keep throttle in
position.
slowly. FAST when mowing.
Check mower deck. Blades obstructed by Clear mower deck of
grass, mud, etc.
any obstructions.
Check travel speed.
Lawn tractor moving Reduce travel
too fast for mowing
speed.
conditions.
Check mower deck Mower deck height Adjust mower deck
height.
set too low for grass
height to obtain
conditions.
suitable cut quality.
Check grass
Wet grass is difficult Mow only when
conditions.
to mow. grass is dry.
Check mower deck Mower deck not Adjust mower deck
level. properly level.
level.
Check blades. Blade bent, cracked Inspect, sharpen, or
or dull. replace blade as.
Check blade belt. Belt worn or not Make sure belt is
properly installed. properly installed.
Check tire pressure. Incorrect tire
Inflate tires to correct
pressure causing pressure.
deck misalignment.
Check anti-scalp
rollers
Rollers misadjusted. Adjust rollers.
High effort required
Front draft arm on Adjust front draft
to lift and latch deck mower adjusted too arm.
lift handle. short, causing lift
system to bind.
95