Honda HA4118H38A Owner's Manual page 52

TRANSPORTING
BEFORE LOADING
1. If your lawn tractor is equipped with an optional grass bag kit,
remove the bags, hopper cover, lower and upper chute.
2. If the engine has been running, allow it to cool for at least 15 min-
utes before loading the lawn tractor. Make sure to turn the fuel
valve OFF.
3. Move the lift lever all the way back to TRANSPORT
4. If you need to push the lawn tractor into position, make sure
the transmission release control is in the RELEASED position.
See page 18.
LOADING AND UNLOADING
1. Transport the lawn tractor on a flat, level trailer or truck bed. The
tiedown points should be near or on the floor.
2. Securely tie the lawn tractor down, front and rear, with ropes or
straps. Use front and rear axles when attaching the tiedowns. Do
not attach tiedowns to the steering rods.
3. When the lawn tractor is in position, turn the fuel valve OFF to
reduce the possibility of fuel leaking.
4. The lawn tractor may spill fuel if tilted during loading or transport-
ing. Wipe up spilled fuel immediately.
50