Honda H5013 Owner's Manual page 85

5. Coat the battery terminals with grease.
6. Reinstall the battery set plate.
NOTE: Evenly tighten the 6 mm set plate nuts a little at a time. Install the
set plate so that the filler caps (A and B) to either side of it can still be
removed.
SET PLATE
m When disconnecting the battery cable, be sure to disconnect at
the battery negative (-1 terminals first. To connect, connect at the
positive (+I terminal first, then at the negative (-1 terminal. Never dis/con-
nect the battery cables in the reverse order, as this can cause a short cir-
cuit when a tool contacts the terminals.
83