Hydraulic
lift system
NOTE:
l
To make this inspection,
it is necessary
to start the engine;
refer to the
procedures
described
on Page 45.
l
This inspection
should
be made with
an attachment
mounted
on the
tractor.
l
The check procedure
is the same for the front or rear attachment
lifts.
Check
either,
by selecting
the appropriate
hydraulic
cylinder
selector
lever position.
(1) Start the engine.
(2) Set the hydraulic
cylinder
selector
lever in FRONT or REAR (option).
(3) Move the lift lever to FAST or SLOW UP position,
then release your
hand from the lever.
Check that the lift lever returns to NEUTRAL.
(4) Check
that the attachment
is lowered
when the lift lever is moved
to the DOWN
or SLOW
DOWN
position.
(5) Check
the descent
speed
and adjust
descent
speed
if necessary,
see page 25.