Traction Control System; (Tcs)/Stabilitrak ® Light; Wait-To-Start Light; Tire Pressure Light - Chevrolet Cruse 2014 Owner's Manual

Traction Control System

(TCS)/StabiliTrak
This light comes on briefly when the
engine is started.
If the light does not come on, have
the vehicle serviced by your dealer.
If the system is working normally,
the indicator light turns off.
If the light is on and not flashing, the
TCS, and potentially the StabiliTrak
system have been disabled. A DIC
message may display. Check the
DIC messages to determine which
feature(s) is no longer functioning
and whether the vehicle requires
service.
If the indicator/warning light is on
and flashing, the TCS and/or the
®
Light
StabiliTrak system is actively
working.
See

Wait-to-Start Light

For diesel engines, the wait-to-start
light shows that the engine is
functioning properly and indicates
when the engine can be started.
The fast warm-up glow plug system
makes the wait-to-start light stay on
for a shorter amount of time than
most diesel engines.
For more information, see
Instruments and Controls

Tire Pressure Light

.
For vehicles with the Tire Pressure
Monitor System (TPMS), this light
comes on briefly when the engine is
started. It provides information
about tire pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of
the tires are significantly
underinflated.
A Driver Information Center (DIC)
tire pressure message may also
display. See
possible, and inflate the tires to the
pressure value shown on the Tire
and Loading Information label. See
.
5-19
. Stop as soon as
.