Chevrolet Cruse 2014 Owner's Manual page 335

3. Pull the inflator kit rearward.
Squeeze the two tabs of the
quick release buckle to remove
the tire sealant and
compressor kit.
To store the inflator kit, reverse the
steps.
The tire sealant and compressor kit
is located in the trunk in a storage
compartment on the driver side of
the vehicle.
To remove the kit:
1. Open the trunk. See
.
2. Turn the wing nut
counterclockwise to remove it.
3. Remove the tire sealant and
compressor kit from the storage
compartment.
4. Remove the tire sealant and
compressor kit from the bag.
To store the inflator kit, reverse the
steps.
To access the spare tire and tools:
1. Retainer Nut