Chevrolet Cruse 2014 Owner's Manual page 295

Automobile
Hide thumbs Also See for Cruse 2014:
Table of Contents

Advertisement

2. For the driver side bulb, remove
the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
3. Remove the connector
retaining tab (1).
4. Disconnect the wiring harness
connector from the bulb (3) by
pressing the connector
release (2) and pulling
straight back.
5. Remove the bulb (3) from the
headlamp assembly by turning
counterclockwise and pulling
straight back.
6. Install the new bulb in the
headlamp assembly by turning
clockwise.
7. Install the wiring harness
connector to the bulb. Be sure
the connector release (2) locks
into place.
8. Install the connector
retaining tab (1).
9. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.
1. Open the hood. See
.
2. For the driver side bulb, remove
the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
3. Remove the parking/turn signal
lamp bulb socket from the
headlamp assembly by turning
counterclockwise.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents