FRONT VIEW
See front control panel
1. Power Button
Use this button to turn the display on or off.
<Power (DPMS) Indicator>
This Indicator lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to
amber.
2.
Button
Use these buttons to choose or adjust items in the
On Screen Display.
This feature lets you easily select the best desired image
condition optimized to the environment (ambient
illumination, image types etc.).
• DAY : Bright ambient illumination
• NIGHT : Dark ambient illumination
• TEXT : For text images (Word processing etc.)
• MOVIE : For animation images in videos or movies
• PHOTO : For pictures or drawings
• USER MODE : For use under user setup image
conditions (Brightness, contrast and color tint are
selected by the user in OSD Screen Setup Menu.)
OPERATING INSTRUCTIONS
Power Connector
D-Sub Signal Connector
Front Control Panel
3
2
- 5 -
REAR VIEW
DVI-l Connector
4
1
100
100
Bring up Contrast and Brightness adjustment.
:
Use this button to make Dsub or DVI connector active.
This feature is used when two computers are connected to the
SOURCE
display. The default setting is Dsub.
3. Menu Button
Use this button to enter or exit the On Screen
Display.
4. AUTO/SELECT Button
Use this button to enter a selection in the On
Screen Display.
When adjusting your display
settings, always press the
PROCESSING
AUTO/SELECT button before
AUTO CONFIGURATION
entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is 1024x768.