P2P Port; 802.1D And 802.1W Compatibility; Stp Bridge Global Settings - D-Link DES-3010F Manual

P2P Port

A P2P port is also capable of rapid transition. P2P ports may be used to connect to other bridges. Under RSTP, all ports
operating in full-duplex mode are considered to be P2P ports, unless manually overridden through configuration.

802.1d and 802.1w Compatibility

RSTP can interoperate with legacy equipment and is capable of automatically adjusting BPDU packets to 802.1d format
when necessary. However, any segment using 802.1d STP will not benefit from the rapid transition and rapid topology
change detection of RSTP. The protocol also provides for a variable used for migration in the event that legacy equipment
on a segment is updated to use RSTP.
The Spanning Tree Protocol (STP) operates on two levels:
1. On the switch level, the settings are globally implemented.
2. On the port level, the settings are implemented on a per user-defined group of ports basis.

STP Bridge Global Settings

To open the following window, open the Spanning Tree folder in the L2 features menu and click the STP Bridge Global
Settings link.
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
Figure 7- 14. STP Bridge Global Settings
78