Installation; Package Contents; Before You Connect To The Network - D-Link DES-3010F Manual

Installation

Package Contents

Before You Connect to the Network

Installing the Switch without the Rack
Rack Installation
Power On
The Optional Module
Redundant Power System
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items:
One DES-3010F, DES-3010G, DES-3018, or DES-3026 Fast Ethernet Switch
•
Mounting kit (two brackets and screws)
•
Four rubber feet with adhesive backing
•
One AC power cord
•
RS-232 console cable
•
One CD Kit for User's Guide / CLI / D-View module / SNMP module
•
This Manual with Registration Card.
•
If any item is found missing or damaged, please contact your local D-Link Reseller for replacement.
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up the
Switch.
Install the Switch on a sturdy, level surface that can support the weight of the switch. Do not place heavy objects
•
on the Switch.
The power outlet should be within 1.82 meters (6 feet) of the Switch.
•
Visually inspect the power cord and see that it is fully secured to the AC power port.
•
Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at least
•
10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.
•
Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust,
•
and direct exposure to sunlight.
When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber feet
•
cushion the Switch, protect the casing from scratches and prevent it from scratching other surfaces.
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
SECTION 2
17