Honda 08A06-3E1-300 Operating Instructions Manual page 16

In Case of Difficulty
SYMPTOMS
I Skips.
I Stuck on one track.
I CD ejects during play.
CAUSE
Scratches. 1
Fingerprint marks or dust. (Unclean sur-
face.) 2
SOLUTION
• Handle CD by edge only.
• Keep CD clean by using a cleaning kit
specifically designed for CDs.
• Load CD straight and
level, not at an angle,
to prevent further
scratching.
SYMPTOMS
I CD loads, then ejects after a few sec-
onds.
CAUSE
CD not being centered on clamping mech-
anism. 4
SOLUTION
• CD center hole defective, preventing
table of contents (TOC) to be read, trig-
gering the eject mechanism. Defective
CD should not be in CD Changer.
16
CD Changer
SYMPTOMS
I Skips.
I Stuck on one track.
I CD ejects during play.
CAUSE
Pin holes in CD caused during stamping
process-reflective material missing. 3
SOLUTION
• Check for pin holes by
holing CD up to a light
source and observing
it as illustrated.
• Defective CD should
not be used in CD
Changer.
SYMPTOMS
I CD loads, then ejects after a few sec-
onds.
CAUSE
Rough edge. 5
SOLUTION
• Rough edges may touch mechanism
parts and can be corrected by lightly
sanding CD edges.