Table of Contents
Advertisement
Main Menu
Table of Contents
Audio System
Audio System Lighting
You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page
77
). The audio system
illuminates when the parking lights
are on, even if the radio is turned off.
Radio Frequencies and Reception
For information, see page
144
Comfort and Convenience Features
Digital Clock
The audio system display usually
shows the time when the ignition
switch is in ACCESSORY (I) or ON
(II). It shows the operation mode of
the radio, cassette player, CD player,
or optional CD changer when you
operate them, then goes back to the
time display after five seconds.
160
.
If an error occurs while operating
the CD player or optional CD
changer, the display will keep
showing the error code and will not
switch to the time display until the
error is corrected (see pages
150
).
You can set the time only when the
clock is displayed.
To set the time, press the CLOCK
(SCAN/RPT) button until you hear a
beep. The displayed time begins to
blink.
Press and hold the H (Preset 4)
button until the hour advances to the
desired time.
Press and hold the M (Preset 5)
button until the minutes advance to
the desired time.
Press the CLOCK (SCAN/RPT)
button again to enter the set time.
148
and
Advertisement
Chapters
Table of Contents
