Audio System Lighting; Operating The Cassette Player; Features - Honda 2002 Accord Owner's Manual

Audio System

Audio System Lighting

You can use the instrument panel
brightness control dial to adjust the il-
lumination of the audio system (see
page ). The audio system
65
illuminates when the parking lights
are on, even if the radio is turned off.
Radio Frequencies and Reception
For information, see page

Operating the Cassette Player

The ignition switch must be in
ACCESSORY (I) or ON (II).
Make sure the tape opening on the
cassette is facing to the right, then
insert the cassette most of the way
into the slot. The system will pull it
in the rest of the way, and begin to
play.
152
Comfort and Convenience Features
The tape direction indicator will light
to show you which side of the
cassette is playing. The
the side you inserted facing upward
is now playing. If you want to play
the other side, press the PROG
button.
Dolby noise reduction turns on when
170 . you insert a cassette. The
cator will light in the display. If the
tape was not recorded with Dolby
noise reduction, turn it off by
pressing the
Noise reduction remains off until you
turn it on by pressing the button
again.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the EJECT
button.
You can remove the cassette with
the ignition switch in any position,
indicates even if the audio system is turned off.
If you turn the system off while a
tape is playing, either with the PWR/
VOL knob or by turning off the
ignition, the cassette will remain in
the drive. When you turn the system
indi- back on, the tape will begin playing
where it left off.
To switch to the radio or CD
button. changer while listening to a tape,
press the AM, FM or CD button. To
change back to the cassette player,
press the TAPE button.