Remote Control Friction Adjustment; Other Checks; Fuel Hose; Stem Bracket/Clamp/Screws - Honda Outboard Motors BF25A Owner's Manual

5. PRE-OPERATION CHECKS
Remote Control Friction Adjustment
TO INCREASE
FRICTION
Operate the remote control lever into
forward and reverse gears and check
for the amount of drag felt.
Adjust the remote control friction
adjuster so that a slight amount of drag
is felt. The remote control lever should
move smoothly and freely.
Other Checks
n
8. Tool Kit
Check the following items:
1. 'Ihe fuel hose for kinking, collaps-
ing or loose connections.
2. The stem bracket for damage. Make
sure the clamp screws and mounting
bolts (if equipped) are tight.
3. The tool kit contents. Compare your
tool kit contents against the tool kit
illustration above. Replace any
missing items.
4. The anode for damage, looseness or
excessive corrosion.
The anode helps to protect the outboard
motor from corrosion any time it is
exnosed directly to the water.
PLAT SCREWDRIVER
PHILLIPS
SCREWDRIVER
scRRwDRlvRR
C~= pe
HANDLR
TOOL BAG
OIL CHECK
SCREWDRIVER
m
lax 19 mm WRRNCH
Replace the anode when it has been
visibly reduced in size.
-1 Painting or coating the
anode will lead to rust and corrosion
damage to the outboard motor.
The following materials should be
kept with the boat:
1.
Owner's Manual.
2. Tool Kit.
3. Spare engine oil, spark plugs,
propeller, propeller cotter pins and
nut.
4. Required information regarding
boating laws and regulations.
32