D-Link AirPlusXtremeG DI-624 Manual page 32

Using the Configuration Menu
Tools> Admin
At this page, the DI-624 administrator can change the system password. There are two
accounts that can access the Broadband Router's Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access. User
can only view the settings but cannot make any changes.
Administrator-
Password-
User-
Password-
Remote Management-
the Internet by a web browser. A username and password is still required to access the
Web-Management interface. In general, only a member of your network can browse the
built-in web pages to perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
IP Address- The Internet IP address of the computer that has access to the Broadband
Router. If you input an asterisk (*) into this field, then any computer will be able to access
the Router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port- The port number used to access the Broadband Router.
Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
Apply-
admin is the Administrator login name
Enter the password and enter again to confirm
user is the User login name
Enter the password and enter again to confirm
Remote management allows the DI-624 to be configured from
Click Apply to save the changes
32