Dell OptiPlex 9010 Owner's Manual page 62

Option
Table 22. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 23. Image Server
Option
Lookup Method
ImageServer IP
ImageServer Port
Client DHCP
Client IP
62
Description
• Bluetooth
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
Controls the SERR message mechanism. Some graphics cards require that the SERR
message mechanism be disabled.
• Enable SERR Messages (selected by default)
Description
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Displays the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP.
Allows you to specify the primary IP port of the ImageServer, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Specifies how the client obtains the IP address.
• Static IP
• DHCP (selected by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer.
Displays the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP.