Disk.management.-.S.m.a.r.t.test - D-Link ShareCenter DNS-315 User Manual

Disk Management - S.M.A.R.T Test
S.M.A.R.T stands for "Self-Monitoring, Analysis, and Reporting Technology". This is a system on the hard drive used to
monitor and report on the health of the drive. If the HD is grayed out, then it does not support S.M.A.R.T.
S.M.A.R.T To run the S.M.A.R.T test, select the hard drive you
Test wish to perform the S.M.A.R.T test on. Then select
whether to run a Quick or Extended S.M.A.R.T
test. Then press "Start" to run the test. Press the
Create Schedule button to run the test at a pre-
determined time and date.
Quick Test Runs a quick S.M.A.R.T test. The test usually takes
less than 10 minutes. This test will check the
electrical, mechanical, and read performance
of the hard drive. The results are displayed as
Passed/Failed on the web UI and can also be sent
as an e-mail alert.
Extended
Runs an extended S.M.A.R.T test. This test requires
Test
a lot more time to complete. However, it is a more
thorough and complete test when compared to
the Quick Test.
Send result
Enable this function in order to have the results of
by E-mail:
the S.M.A.R.T test sent to you by e-mail.
Create Click on this button in order to create a scheduled
Schedule S.M.A.R.T test. You will be able to schedule a test
on a daily, weekly, and monthly basis.
D-Link ShareCenter DNS-315 User Manual
Schedule
By clicking the "Create Schedule" button the user
can create a S.M.A.R.T test schedule where this test
will run automatically at the configured time.
Select the frequency (Daily, Weekly, Monthly) and
the Time here. Click on the 'Create' button to add a
schedule.
Schedule In the window all the created schedule lists will be
List displayed.
69