Rear Seats
Rear Seat Operation
Removing the Rear Seat
1-6
ofrecido por www.electromanuales.com
1. Disconnect the quick
release latch plates for
the lap shoulder belts
on the bench seat to be
removed. To do this,
press the tip of a key
into the release hole of
the safety belt buckle
while pulling up on the
safety belt.
2. Locate the pins.
•
There are two pins located on the inboard sides
of the rear seats. If the vehicle has floor mats,
the pins will be located under a flap that has
been cut into the mat. The driver's side pin will
have an "L" marked on it and will look like this: