Updating The Bios - Dell OptiPlex 3020 Owner's Manual
Small form factor
Hide thumbs
Also See for OptiPlex 3020:
- Quick start manual ,
- Technical manualbook (52 pages) ,
- Owner's manual (50 pages)
Table of Contents
Advertisement
Option
Client SubnetMask
Client Gateway
Advanced
Table 13. System Logs
Option
BIOS events
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1.
Re-start the computer.
2.
Go to dell.com/support.
3.
Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect Service Tag. Proceed with the
instructions on screen.
4.
If you are unable to locate or find the Service Tag, click the Product Category of your computer.
5.
Choose the Product Type from the list.
6.
Select your computer model and the Product Support page of your computer appears.
7.
Click Drivers & Downloads.
8.
On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.
9.
Identify the latest BIOS file and click Download File.
10. Select your preferred download method in the Please select your download method below
window; click Download File.
The File Download window appears.
44
Description
Specifies the subnet mask of the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the
System Configuration group is set to Enabled with ImageServer
the
Client DHCP is set to Static IP .
and when
Specifies the gateway IP address for the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the
System Configuration group is set to Enabled with ImageServer
the
and when
Client DHCP is set to Static IP .
Specifies for Advanced debugging
•
Verbose Mode (Disabled)
NOTE: This Option is only relevant when the integrated NIC control in
the System Configuration group is set to enable with Cloud Desktop.
Description
Displays the system event log and allows you to clear the log.
•
Clear Log
Integrated NIC control in
Integrated NIC control in
Hide quick links:
Advertisement
Table of Contents
