Installing The Power Switch - Dell OptiPlex 3020 Owner's Manual
Small form factor
Hide thumbs
Also See for OptiPlex 3020:
- Quick start manual ,
- Technical manualbook (52 pages) ,
- Owner's manual (50 pages)
Table of Contents
Advertisement
4.
Perform the following steps as shown in the illustration:
a) Press the clips on both side of the power switch [1].
b) Release it from the chassis [2].
c) Remove the power switch along with its cable from the computer
Installing the Power Switch
1.
Slide the power switch in through the front of the computer.
2.
Connect the power-switch cable to the system board.
3.
Install the:
a) drive cage
b) optical drive
22
Hide quick links:
Advertisement
Table of Contents
