Removing The Palm-Rest Assembly; Prerequisites; Procedure - Dell XPS 11 Service Manual

Removing the Palm-Rest Assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 5. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 7.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover. See "Removing the Base Cover" on page 8.
2 Remove the battery. See "Removing the Battery" on page 11.
3 Remove the mSATA card. See "Removing the mSATA Card" on page 15.
4
Remove the fan. See "Removing the Fan" on page 17.
5 Remove the system board. See "Removing the System Board" on page 24.

Procedure

1 Carefully rotate the palm-rest assembly to an angle of 180 degrees.
1
1 palm-rest assembly
2
2 display assembly
Removing the Palm-Rest Assembly
31
|