Wax Motor - Life Fitness 9000HR Service Manual

Life Fitness Models 9000HR, 8500, and T9i Treadmills
How To... Replace the Wax Motor (9000HR and 8500 INT'L Only)
Special Tools Required: None
1. Turn the unit power OFF at the switch, then unplug
the line cord at the wall outlet.
2. Remove the motor cover.
3. Disconnect the electrical connector at the wax
motor.
4. Remove the mounting
mounting base to the bottom of the frame, and then
lift out the wax motor assembly.
5. Cut the wax hoses off at the wax pump fittings.
6. Install hoses to the new wax motor, and install the wax motor back into the base of the unit in reverse order.
7. Test the wax motor for proper operation.
8. Refer to diagnostics section to log maintenance repair of the wax motor.
screws securing the
23
Electrical
Connector
Inlet
Pump
Outlet
Motor
Mounting
Base