Diagnostic Settings; Diagnostic Modes; Description; Motor Test - Life Fitness 9000HR Service Manual

Hide thumbs Also See for 9000HR:

Operation manual (42 pages)

Assembly instruction manual (8 pages)

Manual (1 page)

Table Of Contents

Table of Contents

Life Fitness Model 8500 Treadmill

Diagnostics – Service Menu

DIAGNOSTIC MODES

Service Menu: Press the Stop key twice and then hold down the Incline Up arrow key. To advance through the

diagnostic modes press the Quick Start key, to go backwards use the Stop key

There are 12 different diagnostic modes and settings shown in the order as they appear in the table.

Sequence

Diagnostic Modes

Software Version Mode

Display Test (all lights on)

Cycling Display Test

Keypad Test

Motor Test

Incline Test

Waxer Test

Polar Test (heart rate)

Statistics

Settings

System Errors

Photoshoot Mode

DESCRIPTION

Software Version Mode

Upon entry into this mode, the console software version will be display first as "ConS xx.x.", then the motor

controller software as "CtrL xx.xx.", and finally the date the software version was made (MM = 2 digit month,

DD = 2 digit day, and YYYY = 4 digit year). Use the Weight arrow key to cycle through the different versions.

Display Test = "diSPLAY"

This mode turns all of the displays on. To cycle through the displays, press the Quick Start key.

Cycling Display Test

This mode cycles through the different display segments automatically.

Keypad Test = "buttonS"

This test allows you to check the keypad. Use the table below to verify the key functions.

Key

Weight Up Arrow

Incline Up Arrow

Speed Up Arrow

Weight Down Arrow

Incline Down Arrow

Speed Down Arrow

Emergency Stop Button

(pressed)

Emergency Stop Button

(released)

Not-Used key

Stop Key

Quick Start Key

Default