Honda Accord xl 2007 Fit Owner's Manual page 226

０５／１２／２１ １７：０５：０３ ３１ＳＡＡ６００ ０２２５
Fuses
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages 224 and
diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. Remove the cover from the fuse
box.
222
FUSE
225 , or the
3. Check each of the large fuses in
the under-hood fuse boxes by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head
screwdriver.
FUSE PULLER
BLOWN
4. Check the smaller fuses in the
primary under-hood fuse box and
all the fuses in the interior fuse
box by pulling out each one with
the fuse puller provided in the
interior fuse box.