Honda Accord xl 2007 Fit Owner's Manual page 214

０５／１２／２１ １７：０３：２８ ３１ＳＡＡ６００ ０２１３
Changing a Flat Tire
13. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
14. Lower the vehicle to the ground,
and remove the jack.
210
15. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
16. On Sport model:
Remove the center cap before
storing the flat tire.
For For
normal spare
tire
tire
17. Place the flat tire face down in the
spare tire well.
18. Secure the flat tire by screwing
the wing bolt back into its hole.