05/12/21 17:03:20 31SAA600 0212
JACKING POINT
9.
Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by a
mark molded into the underside of
the body (Sport model). Turn the
end bracket clockwise until the top
of the jack contacts the jacking
point. Make sure the jacking point
tab is resting in the jack notch.
WHEEL NUT WRENCH
10.
Use the extension and the wheel
nut wrench as shown to raise the
△
vehicle until the flat tire is off the
ground.
11.
Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
Changing a Flat Tire
BRAKE HUB
EXTENSION
12.
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
CONTINUED
209